Request a quote or call us at 702-718-0088 to reserve a machine or attachment today.

Engine

Net Power - ISO 9249	298.0 HP
Engine Model	CAT C9.3 ACERT
Displacement	568.0 in3
Maximum Net Power - 1,700 rpm - SAE J1349	298.0 HP
Maximum Net Power - 1,700 rpm - SAE J1349 - Metric	302.0 HP
Maximum Power - 1,800 rpm - ISO 14396	325.0 HP
Maximum Power - 1,800 rpm - ISO 14396 - Metric	329.0 HP
Maximum Power - 1,800 rpm - SAE J1995	330.0 HP
Maximum Power - 1,800 rpm - SAE J1995 - Metric	334.0 HP
Maximum Net Power - 1,700 rpm - ISO 9249	298.0 HP
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric	302.0 HP
Maximum Net Torque - 1,000 rpm	1204.0 ft-lb
Peak Gross Torque - 1,200 rpm - ISO 14396	1261.0 ft-lb
Peak Gross Torque - 1,200 rpm - SAE J1995	1275.0 ft-lb

Weights

Operating Weight	54871.0 lb
Note	Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, manual diff lock/open axles (front/rear), power train guard, secondary steering

Buckets

Bucket Capacities

3.20-9.94 m (4.19-13.0 yd)

Operating Specifications

Breakout Force	44075.0 lbf
Static Tipping Load - Full 37° Turn - No Tire Deflection	38396.0 lb
Static Tipping Load - Full 37° Turn - With Tire Deflection	35626.0 lb
Note (1)	For a machine configuration as defined under Weight
Note (2)	Full compliance to ISO 14397:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Transmission

Forward - 1	4.2 mile/h
Forward - 2	8.1 mile/h
Forward - 3	14.4 mile/h
Forward - 4	24.5 mile/h
Reverse - 1	4.7 mile/h
Reverse - 2	9.3 mile/h
Reverse - 3	16.5 mile/h
Reverse - 4	24.5 mile/h
Note	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.

Hydraulic System

Hydraulic Cycle Time - Total	10.7 s
Implement Pump Type	Variable Displacement Piston
Implement System - Maximum Operating Pressure	4496.0 psi
Implement System - Maximum Pump Output at 2,200 rpm	95.0 gal/min

Service Refill Capacities

Cooling System	18.9 gal (US)
Crankcase	6.5 gal (US)
Differential - Final Drives - Front	15.1 gal (US)
Differential - Final Drives - Rear	15.1 gal (US)
Fuel Tank	79.8 gal (US)
Hydraulic Tank	33.0 gal (US)
Transmission	15.5 gal (US)

Sound

Note	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	109.0 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	76 dB(A)*
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	70.0 dB(A)

Dimensions - High Lift

Centerline of Rear Axle to Edge of Counterweight	8.17 ft
Centerline of Rear Axle to Hitch	5.83 ft
Ground Clearance	1.42 ft
Height - Top of Exhaust Pipe	11.58 ft
Height - Top of Hood	9.25 ft
Height - Top of ROPS	11.75 ft
Hinge Pin Height at Carry	2.58 ft
Hinge Pin Height at Maximum Lift	15.75 ft
Lift Arm Clearance at Maximum Lift	13.5 ft
Maximum Width over Tires	9.92 ft
Note	All dimensions are approximate and based on L3 XHA2 tires.
Overall Length - Without Bucket	26.67 ft
Rack Back - Carry Height	49 degrees
Rack Back - Maximum Lift	71 degrees
Rack Back at Ground	39 degrees
Tread Width	7.33 ft
Wheel Base	11.67 ft

Dimensions - Standard Lift

Centerline of Rear Axle to Edge of Counterweight	8.17 ft
Centerline of Rear Axle to Hitch	5.83 ft
Ground Clearance	1.42 ft
Height - Top of Exhaust Pipe	11.58 ft
Height - Top of Hood	9.25 ft
Height - Top of ROPS	11.75 ft
Hinge Pin Height at Carry	2.25 ft
Hinge Pin Height at Maximum Lift	14.67 ft
Lift Arm Clearance at Maximum Lift	12.58 ft
Maximum Width over Tires	9.92 ft
Note	All dimensions are approximate and based on L3 XHA2 tires.
Overall Length - Without Bucket	25.58 ft
Rack Back - Carry Height	50 degrees
Rack Back - Maximum Lift	56 degrees
Rack Back at Ground	41 degrees
Tread Width	7.33 ft
Wheel Base	11.67 ft