| Engine Model | Cat® C27 ACERT™ | | Flywheel Power | 600.0 hp | | Bore | 5.4 in | | Stroke | 6.0 in | | Displacement | 1648.0 in3 | | Engine Power – Gross SAE J1995* (FWD/REV) | 471/571 kW (632/766 hp) | | Engine Power – ISO 14396 (FWD/REV) | 462/562 kW (620/754 hp) | | Engine Power – Net SAE J1349/ISO 9249 (FWD/REV) | 447/538 kW (600/722 hp) | | Note | *Excludes all fan losses. | | Emissions | U.S. EPA Tier 4 Final | | Net SAE J1349/ISO 9249 (FWD/REV) | 447/538 kW (600/722 hp) | | Note | Engine ratings apply at 1,800 rpm. | | Note | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. | | Note | No derating (in FWD gears) required up to 4572 m (15,000 ft) altitude. | | Net SAE J1349/ISO 9249 DIN (FWD/REV) | 608/732 hp | | Engine Power – Net SAE J1349/ISO 9249 DIN (FWD/REV) | 608/732 hp | Weights | Operating Weight | 154700.0 lb | | Shipping Weight | 109775.0 lb | | Note | D10T2 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm/24 in ES shoes, and operator. | | Note | D10T2 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm/24 in ES shoes. | Dimensions (Approximate) | Height (FOPS Cab)* | 161.3 in | | Height (ROPS/Canopy)* | 173.5 in | | Height (Top of Stack)* | 171.5 in | | Length Basic Tractor with Drawbar | 220.4 in | | Length with Multi-Shank Ripper | 285.1 in | | Length with SU-Blade | 292.0 in | | Length with Single-Shank Ripper | 278.8 in | | Length with U-Blade | 305.1 in | | Overall Length SU-Blade and SS Ripper | 360.6 in | | Overall Length Basic Tractor | 209.6 in | | Track Gauge | 100.4 in | | Width over Trunnions | 147.1 in | | Width without Trunnions (610 mm/24 in ES) | 129.6 in | | Ground Clearance* | 28.5 in | | Drawbar Height (Center of Clevis) | 34.0 in | | Length of Track on Ground | 152.8 in | | Note | *Includes grouser height for total dimensions on hard surfaces. | Transmission | 1 Forward | 2.5 mph | | 2 Forward | 4.5 mph | | 3 Forward | 7.9 mph | | 1 Reverse | 3.2 mph | | 2 Reverse | 5.6 mph | | 3 Reverse | 9.8 mph | | Type | 3-speed planetary powershift | | Transmission Clutch Diameter | 17.1 in | Hydraulic Controls | Pump Type | Variable displacement piston | | Bulldozer Relief Valve Setting | 4061.0 psi | | Tilt Cylinder Relief Valve Setting | 2944.0 psi | | Ripper (Lift) Relief Valve Setting | 4061.0 psi | | Ripper (Pitch) Relief Valve Setting | 4061.0 psi | | Combined Pump Output (Implement) | 100.4 gal/min | | Note | Pump output measured at 1,800 rpm engine speed. | | Note | Electro-hydraulic pilot valves assist operations of ripper and dozer controls. | | Note | Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers. | Undercarriage | Shoe Type | Extreme Service (ES) | | Width of Shoe | 24.0 in | | Shoes/Side | 44 | | Grouser Height | 3.7 in | | Pitch | 10.25 in | | Ground Clearance | 28.5 in | | Track Gauge | 100.4 in | | Length of Track on Ground | 152.8 in | | Ground Contact Area | 7347.0 in2 | | Track Rollers/Side | 8 | | Number of Carrier Rollers | 1 per side (optional) | Service Refill Capacities | Fuel Tank | 314.4 gal | | Cooling System | 47.6 gal | | Engine Crankcase* | 18.0 gal | | Power Train | 60.8 gal | | Final Drives (each) | 6.1 gal | | Roller Frames (each) | 16.9 gal | | Pivot Shaft Compartment | 8.7 gal | | Hydraulic Tank | 34.6 gal | | Note | *With oil filters. | Track Roller Frame Steering and Brakes | Hydraulically Applied Multiple-disc Steering Clutch | 15.4 in | | Spring Applied Multiple-disc Brake | 15.4 in | Standards | FOPS | Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II. | | ROPS | Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. | | Sound | The exterior sound pressure level for the standard machine (ISO 6395) is 115 dB(A)/111 dB(A) (sound suppressed). | | Sound | The operator equivalent sound pressure level (ISO 6396) is 77 dB(A)/74 dB(A) (sound suppressed). | Air Conditioning System | Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (3.0 tons). | |
